Mold Remediation Archives - Renovco Ottawa

Posts

Attic Mold Removal In Ottawa

Do you need to remove the mold in your attic? Mold is a type of growth that is defined by a few essential components, such as moisture, a surface to grow on, and a lack of air circulation. Mold attic is the biggest problem that homeowners encounter. Primarily because homes don’t know there is a mold problem until it is already a serious problem.

Attics are frequently thought of as an excellent place for mold growth. Households should have their attics frequently inspected because it can turn off future buyers.

How Attic Mold Is Caused

Simply said, the main reason condensation forms in your attic due to the temperature difference between inside and outside is mold growth. These conditions, together with the fact that attics are left unattended, might promote the growth of mold. Another factor that contributes to the growth of mold is roofing. Years of exposure to the weather can cause holes, gaps, or tears to appear.

How Previous Homeownership Can Cause Mold

It’s likely that different people with different demands and requirements have owned your home over the years. Numerous contractors have employed a variety of strategies to maintain the house operational when it changes hands. For current homeowners, this may have unfortunate repercussions. The attic ventilation system is frequently not as straightforward as it should be.

Several vents, pipes, and ventilation systems all in one area can block or limit airflow effectively. The fact that attics are frequently utilized for storage means that hot air cannot escape through attic vents.

How To Tell You Have Mold

Mold has an ugly appearance. Inhaling mold spores can have a detrimental impact on the home and can cause a number of health issues. For patients who already have a damaged respiratory system, mold is a very harmful fungus. Without enough ventilation, an attic is a stuffy place where air may readily accumulate, which also promotes the growth of mold.

Observing moist insulation is one of the telltale indications of mold in your attic. Mold will without a doubt thrive in the ideal conditions provided by wet insulation. Mold will flourish in the ideal habitat if your roof leaks or water gets in through the roof. A comprehensive evaluation of your attic space and roof could prevent the need for re-installation, which can be a very expensive process.

Why Choose Professional Mold Remediation Specialists?

By examining typical issue locations and ensuring that the ventilation is working properly. Professional mold remediation specialists can conduct a more thorough evaluation of the condition. Moisture is a real issue, mold remediation specialist will inform the client right away so that the appropriate steps can be performed. For years, Renovco Ottawa has employed experts who have spent years honing their abilities.

Mold removal experts must first carefully evaluate the situation before moving on to fix the ventilation by a third party. The respiratory system may suffer if mold spores are inhaled. People who have health conditions, such as those who have asthma, may be more vulnerable to mold spores.

No matter how healthy a person is, mold can have a variety of adverse effects on them. A safety risk exists during the mold treatment process even with all protective personal equipment.

Mold Remediation Ottawa: Basic Information and the Removal Process

Mold remediation identifies and removes or encapsulates large-scale mold from homes to keep residents and homeowners safe. Also, mold treatment becomes a more common feature of purchasing and selling homes. Every homeowner wants to avoid having a mold problem. The dampness in the basement and water intrusion are just two causes.

It’s important to take care of this serious problem as soon as it’s discovered to prevent harm to your property and potential health issues. Despite the fact that there are various mold removal options, should you attempt this project on your own? This significant question is made clearer by our specialists.

What Is Mold

You may be thinking “why is mold bad” and, more significantly, “is mold dangerous” after hearing about it. Here are some guidelines for recognizing mold and the risks associated with its growth.

Mold is a form of fungus that develops in hyphae, which are multicellular structures. Both indoor and outdoor mold spores are created by these hyphae. Mold needs moisture to flourish even though its spores are widely distributed.

How To Spot Mold

Here are some mold warning indicators to look out for in your house:

A musty odor in your home’s dampest room
Green, grey, or black patches or stains, fresh, on a porous surface
White fuzzy stuff under wallpaper and other materials

What Are The Health Risks

Mold can cause harm to your home in addition to health issues when its spores are discharged into the air and inhaled over time. The following are some indicators that mold exposure may be hazardous to your health: unusual headaches, Insomnia, Allergic, Asthma, etc.

How To Remove Mold

Find the source

As previously noted, there are a variety of ways that mold can enter your house. The most crucial thing to keep in mind is that humidity is always the perfect environment for mold growth. It’s imperative that you locate the source of the moisture before taking any action.

Contain Area

Even though mold grows on or in surfaces, its spores can travel through the air, therefore it’s crucial to contain an area with mold before decontaminating it. Turn off any central air vents and use plastic to completely isolate the area from the rest of the house.

Protect Yourself

Making sure you are appropriately protected is a further crucial step. Fabrics are porous and can spread mold to adjacent rooms, endangering your health in the process. Get mold remediation-specific coveralls, masks, gloves, and other protective gear. Masks made of paint and coveralls won’t be enough to keep you safe.

Cleanse Area

Use borax, a white powder cleaner that you may find in the laundry detergent aisle if the mold is contained in a limited area. It destroys the mold when combined with water and applied to the affected region; it also stops it from coming back. However, because it contains water, it is not advised to use it on porous surfaces like carpeting or drywall.

It’s advisable to entirely remove and discard porous sections that are obviously contaminated because drying them out and removing the mold may be too difficult or impossible to do in order to stop future mold growth. It’s crucial to understand that bleach will not be effective if you have major mold contamination.

It will fade the color but not get rid of the mold, and because of the humidity, new mold development will be encouraged. Utilizing a negative air machine to remove airborne particles is advised as an extra measure after decontamination. This will keep the mold spores contained and prevent the rest of the house from becoming contaminated.

It’s crucial to be aware that mold removal is not advised for those who have health issues, particularly respiratory issues. As much as possible, keep all members of your household away from any contaminated locations until they have been properly cleaned.

When To Call In An Expert

While these four processes might seem easy enough, there are numerous situations where hiring a remediation specialist is strongly advised. The following are instances in which you should contact a mold decontamination specialist rather than performing DIY treatments:

Black mold is present, the infected area(s) is deemed to be medium or large, and you are unsure of the source of the moisture that led to the mold.

Choose Renovco Ottawa for Mold Remediation

The Unique Concept of Renovco is cleverly recognizable. Everything from emergency work reconstruction, content handling and cleaning, warehousing, mold remediation, ozone treatment, and fire-line system to a distribution channel and one-stop shop for design services is offered.

This innovative solution is becoming to become not just a unique skill that Renovco enjoys but also a profound aspect of peace of mind that clients like. Renovco quickly rose to the top in the renovation and restoration industry from the very beginning. Contact us by calling 613-727-7070 or emailing infoottawa@renovco.com.

How to Avoid Mold & Mildew in Your Home

How to Keep Your Home Free of Mold and Mildew

Once your bathroom remodel is complete and your home seems to be in perfect shape, you’ll want to maintain it that way for as long as possible. These cleaning and maintenance suggestions can help your bathroom makeover last longer and prevent mold and mildew growth:

What is the difference between mold and mildew?

Mold and mildew are spore-like collections of microscopic organisms that flourish in damp and moist areas, such as your bathroom.

Mold spores start to develop and are eventually discharged into the air if you don’t clean your bathroom correctly.

These spores are subsequently inhaled into your lungs, which can be dangerous for persons with weak immune systems or breathing problems like asthma. Breathing problems, coughing, a sore throat, and headaches are all common side effects.

Mold flourishes in humid environments, therefore it creates the biggest issues during the summer. Mold may also cause havoc in the winter if the conditions are perfect.

Mold and mildew will taint the air quality in your home. Mold might be to blame if you’ve been experiencing problems breathing inside. In addition to coughing and wheezing, severe cases can result in neurological problems and even death. As a result, every homeowner should be concerned about mold.

It’s critical to understand how mold grows and where it might appear. This will aid in the prevention of mold formation in the first place, which is always the best option. Mold can be difficult to completely remove once it has appeared.

When it comes to mold and mildew, what’s the difference?

Mold and mildew are both fungi, although there are some small variations between them. Mold, for example, is a common component of home dust.

Mildew, on the other hand, prefers flat surfaces to develop on. It may be found on paper, leather, wood, walls, and ceilings, among other organic materials.

The look and odor of the two are also distinct.

Mold can be black, blue, red, or green in color. It also has a slimy feel and can occasionally contain fluff.

Mildew begins as a white substance, which distinguishes it from mold. It begins to change hues of yellow and brown as it progresses. It has a powdery feel rather than slime or fuzz.

In order to form, both require biological material. It’s what provides a food supply for fungi to develop on. Mold and mildew grow on a variety of materials, including wood, leather, paper, and textiles.

The fragrance of the two distinguishes them. Mildew has a faint odor that smells musty. It’s commonly compared to wet, un-dried clothes.

Mold has a much stronger and terrible odor. This is because the mold produces microbial volatile organic compounds, or MVOCs, as it grows.

Finally, mildew grows on surfaces, whereas mold crawls beneath them. So, if you notice fungal growth on the surface of your cabinets, you know it’s mildew.

Mold grows under the surface, in cracks and holes, inside walls, and in fissures and holes. As a result, mold is more difficult to detect, which can lead to it spreading out of control.

Mold and mildew thrive in the following conditions.

Mold and mildew can occur everywhere there is high heat, a food supply (organic material), and a moderate level of humidity. As a result, the months of June through August are the most difficult. During these months, it’s advisable to keep a watchful check on your walls, ceilings, and behind sinks.

Mold and mildew can also occur if your heat is turned on in the winter and there is dampness.

You’re in the danger zone if the temperature is between 77° and 87° and the humidity is between 62 and 93 percent. When evaluating your house for mold and mildew, keep this in mind.

The following is a list of the most common molds found in homes:

Alternaria
Aspergillus
Chaetomium
Cladosporium
Fusarium

Whatever sort of mold develops in your house, they all have one thing in common: they must be removed. Mold of any sort may be deadly, which is why you should get rid of it. The good news is that mold and mildew can be prevented from growing in the first place.

Mold and Mildew Checking Points in Your Home

In your Ottawa home, you’ll need to know where to look for mold and mildew. You may not even be aware that you have a mold problem if this is not done. That’s the last thing you want, because mold that has gotten out of hand may cause serious harm to your house. Not only that, but getting rid of it will be expensive. The greatest thing you can do is examine your home on a regular basis to avoid it from forming.

During the hot/humid months, pay special attention to the following areas:

Your ductwork for ventilation
Your HVAC system’s immediate surroundings
Sinks can be found under the surface.
Bathroom and kitchen areas surrounding sinks and faucets
Showers, tubs, and shower curtains
Any location with a lot of moisture (i.e., cabinets next to the shower)
Dishwashers and washers and dryers
Your dishwasher’s immediate surroundings
Inside and outside of your refrigerator

You can avoid most mold and mildew from growing if you keep a careful check on these locations. Mold may, however, grow behind your walls and in other places you can’t see. That’s why learning how to undertake mold testing in your house is an excellent idea.

How To Get Rid of Mold

What is the mold?

Mold is very common in buildings. There are many different types of mold, and they can occur both indoors and outdoors. Mold grows in places with a lot of moisture, and everywhere that food is provided for them, such as your walls, carpet, floors, appliances, or furniture. Also in kitchens, bathrooms, laundry rooms, basements, and crawl spaces.

Types of mold

Rhizopus stolonifer is one of the more common types because it is found in tropical and subtropical regions.
Alternaria is another type of mold and it causes allergies in humans. Alternaria grows indoors and it also causes hay fever or hypersensitivity reactions that sometimes lead to asthma.
Aspergillus is found indoors, powdery food items, and building materials such as drywall and parquet
Penicillium can be found in a variety of places, including water-damaged structures as well as various foods.
Cladosporium is another type of mold that can grow in either warm or cool areas.

How to prevent it

Dry things thoroughly before storing them for a long time.
After showering always open the bathroom window
Use aspiration whenever you cook
Ventilating house every day by opening doors and windows
Ensure to keep moisture in control because it’s level should be under 60 percent.

How to get rid of mold

If mold is spread in lesser areas than 10 sq. feet follow these steps:

Wear proper gear when cleaning.
Try a mixture of bleach and warm water.
Use vinegar.
Use a borax solution to kill and inhibit mold growth.
Try using baking soda, either in a paste or by itself.

Hire the best team to do it

If the mold covers 10 or more square feet you should call a professional team to deal with. Using professional mold removal services is the best way to get rid of mold because the process will be quick and efficient and the living environment in your home will be fresh again.

WHY CHOOSE RENOVCO?

Our teams of experts are always ready to serve you, whether you would like to design your dream kitchen, remodel a bathroom, finish the basement, create a new home extension, renovate your office or get your home restored after a flood or fire, you can count on Renovco!

Renovco has a smartly identifiable Unique Concept. From emergency work reconstruction, content handling and cleaning, warehousing, mold remediation, Ozone treatment, and Fire-line system to a distribution channel and one-stop-shop for design services. This clever solution is translating to become, not only an exclusive competency that Renovco enjoys but also a profound peace-of-mind feature that clients treasure.

So, feel free to contact us here.

Mold Cleanup Ideas.

What is mold?

Mold in your home can make you sick, especially in some cases if you have allergies or asthma. Mold exposure for a long time can irritate your eyes, skin, throat, nose, also lungs. Also, mold is a type of fungus that consists of small organisms that are found almost everywhere. They can be different colors white, orange, green, black, or purple. Mold in nature plays an important role, breaking down dead leaves, plants, and trees. Molds reproduce by means of tiny, lightweight spores that travel through the air. Mold cleanup ideas.

Mold spores in small amounts are usually harmless, but they can start growing once they land on a damp spot in your home. While they are growing on a surface that they have landed, spores can be released into the air where they can be easily inhaled. Health problems will start to appear if you are sensitive to mold.

Some molds and yeasts cause food spoilage or disease, others play an important role in biodegradation or in the production of antibiotics, beverages, various foods, and enzymes. Mold growth requires moisture from different sources like washing, cooking, air humidifiers, condensation or leaks. Poor ventilation also contributes to higher humidity levels and leads to condensation which affects mold growth.

Where does mold grow?

Mold grows everywhere that food is provided for them, your walls, carpet, floors, appliances, or furniture. You’re most likely to see mold in damp places such as kitchens, bathrooms, laundry rooms, basements, and crawl spaces.

Types of mold.

Rhizopus stolonifer is one of the more common types,, also known as black bread mold. It is a type of mold that enjoys other foods such as fruits and vegetables.
Penicillium is another well-known type of mold from which the antibiotic penicillin is derived. It can be found in a variety of places, including water-damaged structures as well as various foods.
Alternaria is another type of mold that usually occurs in damp places indoors, such as under leaky sinks or showers.
Aspergillus is often found on dusti, indoors, powdery food items, and building materials such as drywall
Another type of mold is Cladosporium which can grow in either warm or cool areas. It usually tends to appear on fabrics and wood surfaces.

Prevention and protection.

Controlling moisture is the main key to preventing mold from growing. It is also important to maintain the home well ventilated and cleanup.

Main causes of humidity in the home:

The breath of pets and people
Usage of water for cooking and washing
Moisture in the air because of rainy or humid days
Water leaks
Living in a building that has tightly-sealed windows and doors

An advice from the Environmental Protection Agency (EPA) says that people aim for a humidity level below 60%. You must dry up and clean up wet materials within 2 days because that is what it takes for mold to grow. Disinfect, clean up, and dry surfaces prone to mold growth. Improve airflow at home by opening closet doors more frequently and moving furniture far from walls to provide better ventilation to confined spaces.

Build a new home or renovate an old one with mold-resistant products. Mold-resistant drywall, mold-resistant Sheetrock, and mold inhibitors for paints are the mold-resistant products. Moisture-resistant drywall is especially valuable in areas such as laundry rooms, kitchens, bathrooms, and basements. There might be different procedures in cleanup and removing mold from painted walls or drywall.

How to remove mold from painted walls

Try to take any fabric material, electrical equipment, decorative items, and furniture pieces away from the affected area. Protect the surrounding surfaces, cover the windows, floor, and vents with plastic sheets.
Cleanup the walls using a sponge dampened with warm water and a mild dishwashing liquid to remove any dirt.
We recommend you in cases where the mold spots are small to try using natural cleaning. Mix white vinegar with warm water and apply the solution on the affected surface. If the natural method is not showing the desired results, then you need to apply stronger mold removal.

How to remove mold from drywall

Cover the surrounding areas with plastic sheeting to prevent mold spores.
Make sure that you mark a slightly larger section than the visible mold patch as unseen mold spores have probably already affected the adjacent areas.
Use a knife to cut out the affected sections.
Remove the affected patch of drywall and set it down on the plastic sheeting.
Don’t forget to clean up the room with a HEPA vacuum to remove any loose mold spores.
Consider painting the wall with a mold-resistant paint.

Mold cleanup ideas

To ensure appropriate safety and efficient results when cleaning mold off walls make sure you:

Work in an area that is well-ventilated.
Wear protective gear – rubber gloves, protective glasses, long sleeves and pants, and a dust mask.
Keep children and pets away from the mold affected area.
Never mix bleach with ammonia as it results in a highly toxic vapor.
If you have experienced extensive water damage to your home don’t try to DIY. The mold on the walls will most likely be toxic black mold.

If mold is spread in larger areas over 10 sq. feet, you might need professional help to get rid of mold on walls. It may grow in places that are difficult to reach or has affected household materials that cannot be easily cleaned or replaced. Using professional mold removal services is the best way to get rid of mold for good and save you plenty of time. The remediation process will be quick and efficient and the living environment in your home will be fresh again.

WHY CHOOSE RENOVCO?

Ever since its beginning, Renovco promptly became the leader in renovation and restoration services.

The full spectrum approach adopted by Renovco’s Management, from being general contractors to restoration experts to a fully equipped design center has earned Renovco the spot lead in the construction field.

Licensed, Bonded and Insured
Member of the APCHQ
Accredited by the IICRC Professional (Cleanup Trust Certified) and the OCCQ (BBB in Quebec)
In house professionals of trade to guarantee premium service and quality
Winner of the PROFIT 500: Canada’s fastest-growing companies
Winner of the Consumer Choice Award for the last 4 consecutive years
24/7 emergency services after disaster
Comprehensive “turn-key” professional solution.

Mold Cleanup Ideas By Renovco Team

Preventing mold can save a lot of money, time and it easier than to clean up after it damages the home. Renovco as an experienced mold removal company has some mold cleanup ideas to refer you:

The first step is to identify problem areas around your home and correct them.

Of course, identifying the mold problems helps you to remove all mold spores and to prevent a second opportunity to its growth. Make a specific control of your home: where are the problem areas? Check if your basement flood? Have you ever seen condensation on your upstairs window? Don’t forget repairing damaged gutters or roof problems too.

Dry the wet areas immediately.

It is known that mold spores can’t grow without moisture, so take care of wet areas right away. If you have water damage in the basement after heavy rainfall, you should dry it within 24 to 48 hours.

Never leave wet items lying around the house. Always ensure to dry the floor and walls after a shower. Remember also to leave wet clothes in the washing machine, where mold can spread quickly.

Do the proper ventilation

You know that your routine domestic activities can encourage the growth of mold in your home. So ensure that all home activities as cooking dinner, taking a shower, or doing a load of laundry doesn’t invite mold by providing proper ventilation in your bathroom, kitchen, laundry room, and any other high-moisture area.

It’s recommended to use AC units and dehumidifiers (especially in humid climates), but make sure they don’t produce moisture themselves by checking them periodically and cleaning them as directed by the manufacturer.

Another of the most important cleanup ideas is to equip your home with mold-resistant products.

Be sure to use mold-resistant products like mold-resistant drywall or mold-resistant, and mold inhibitors for paints during building or renovating home. Moisture-resistant drywall is especially valuable in areas prone to wetness, such as bathrooms, laundry rooms, basements, and kitchens.

Monitor humidity indoors.

Renovco Teams recommends keeping indoor humidity between 30-60%. A simple way to measure humidity is by using a moisture meter purchased from your local hardware store.

Direct water away from your property.

If your property is in-ground not enough sufficiently sloped away from the foundation, water may collect there and seep into your crawlspace or basement. So take care of this important detail.

Regularly clean or repair roof gutters.

A mold problem can come as a result of a roof that is leaking because of full or damaged gutters. Make regular roof gutters clean and inspect them for any damage. Repair them if you see damages and keep an eye out for water stains after storms that may indicate a leak.

Improve the airflow home.

If temperatures drop, the air is able to hold less moisture. But without good airflow in-home, excess moisture has the possibility to appear on your walls, windows, and floors. To prevent any moisture problem, open doors between rooms, move furniture away from walls, and open doors to closets that may be colder than the rooms they’re in.

The last mold cleanup ideas here are keeping mold off household plants and to care for your plants.

Household plants are beautiful and help keep your indoor air clean but mold likes them too. The moist soil in indoor plants is a perfect breeding ground for mold, which may then spread to other areas of your house. So, take care of your plants and prevent mold problems before they start growing.

For specific and professional help, please contact us here.

Types Of Mold | Remediation Process Ottawa

Mold Cleanup Ottawa | How Dangerous Is Mold?

Whenever water-related disasters strike your home, your primary concern after the event is to expel the flood from your property. You know that when you keep the afflicted area submerged in water, it may cause numerous damages like brittle floorboards and walls, and weaken the constitution of certain items like your furniture and furnishings. Once you have dealt with the problem, however, it is easy to return to your daily routine like nothing ever happened. Sadly, most owners do not realize that, on some occasions, especially when the damage inflicted on your property was great, secondary water damages start to emerge right under their noses. The most common problem is mold. For this, you need a mold cleanup Ottawa company to take care of everything in your home.

Mold Cleanup Ottawa – What Is Mold?

The chance of mold appearing in your home is significantly higher, whenever a flood occurs inside your property. because if the floodwater was not expelled properly or professionally, it is possible that excess moisture will still be present in your home, which can become perfect places for mold to manifest.

Mold is a kind of microorganism that loves to grow in dark, humid, and damp places. Now, although it does not pose any threat because of its size or color, mold, however, can damage the structure of your home and can be detrimental to one’s health.

When you see mold either on your walls, ceilings, or floors, it is a sign that this part of your home’s design is damaged or weak. The best way to remedy this problem is to immediately have it replaced or repaired before it collapses so that no one living in the property will get injured in the future.

When it comes to your health, mold cleanup Ottawa can be difficult to deal with, especially when you are dealing with black molds.

What Is Black Mold?

There are three types of molds: allergenic (non-life threatening), pathogenic molds (attacks the immune system and can grow in your lungs), and toxic molds (the most dangerous and under which black mold is classified).

Almost all molds spread their spores via air travel, but what makes the spores of black mold different from the others is the presence of mycotoxin, and it is this toxin that creates numerous alarming health symptoms which include:

Mental impairment
Breathing problems
Damage to internal organs
Death

Molds can be tough to deal with. This group of fungi — all several thousand different species of them — have been around in the world for millions of years, so they’ve really become an integral part of all ecosystems. In nature, they are important agents in the decomposition of organic matter. Without organisms like molds, the biodegradation of natural materials like dead plants and animals will not be possible.

However, molds become a problem for people when they grow on things like food and agricultural products. In the case of water-damaged properties, mold can also grow on other objects made of natural materials. These include books, cotton upholstery, wallpaper, wooden architectural elements, and so on. For these reasons and not only mold cleanup Ottawa is essential.

The Most Commonly Known Health Concerns That Molds Cause

Allergic reactions and sensitivity to susceptible individuals

Molds can irritate the eyes, throat, and skin, and inhaling them can cause wheezing, coughing, and runny nose. Some people can experience a life-threatening anaphylactic allergic reaction from ingesting or inhaling mold spores.

A range of respiratory problems

When exposed to molds, people with asthma can experience asthma symptoms like coughing, tightness of the chest, and shortness of breath. Children, in particular, are susceptible to developing respiratory illnesses due to exposure to molds.

Fungal infections

People can also develop mycosis and other kinds of fungal infections. Individuals with weakened immune systems are particularly in danger.

Fungal toxicity

Mycotoxicosis can cause both acute and chronic health effects in people who inhale and ingest mold or come into contact with them through the skin. Aside from pulmonary effects and allergies, toxicity from mold exposure can lead to other health problems like those involving the central nervous system and the immune system.

Mold Cleanup Ottawa Partner

Molds can seriously affect your health. There should be no question about that. It is important that water damage in your property is dealt with immediately to prevent the growth and spread of the fungal spores.

It is possible to remove mold through do-it-yourself methods, only when the amount of mold in your home is still controllable. However, if the mold has already occupied a significant percentage of your home, it is best to call in the professionals, so that they can perform a method called: mold cleanup Ottawa, immediately.

Renovco can help you properly sort out your mold infestation problem in the quickest manner possible. Please call us now 613-727-7070 to talk to one of our representatives.

Flood Restoration In Ottawa | Cleaning Tips

Indoor flooding In Ottawa can be caused by natural and in-home disasters. Be it from floods caused by storms or by a burst pipe under your home, the aftermath of such disasters can range from something as simple as a puddle in one corner of the room to something as complicated as knee-high floods. Whatever the cause of the flooding, you need flood restoration in Ottawa. As a responsible homeowner, you want to rid your home from these unwanted damages in the safest and most efficient ways possible.

Depending on the damage caused, some cleaning methods are doable through the do-it-yourself process. However, if the situation is beyond your control, the best choice to clear water damage is by contacting professionals like Renovco as soon as possible.

Flood Restoration In Ottawa – DIY Cleaning Tips

If you are dealing with simple water damage cleanups, is no need to call in the experts. Renovco recommends some steps, you will be able to restore the damaged areas of your home back to its original pre-damaged condition.

Gearing Up

To avoid unforeseen accidents during flood restoration in Ottawa. You have to wear boots to protect your feet and gloves to shield your hands. Some debris such as loose nails and splinters cannot be seen under all that murky water. It is always best to protect yourself before tackling any cleaning job on this scale.

During Flood Restoration in Ottawa, You Have to Prep The Surrounding For Safety

You DO NOT want to be cleaning in a high-risk space. Hazards such as open wires, sharp obstructions, and excess moisture can lead to fatal wounds and injuries. To prepare the area, you begin by turning off the main power of your home and unplugging all electrical devices in the afflicted area. Without the flow of electricity, you are avoiding the possibility of accidentally electrocuting yourself.

The next thing to do is, to turn off the main power of your water. This step only applies if the damage is caused by in-door problems such as burst pipes. Turning off your main water supply will not only stop the water from rushing in your home but also, makes it easier for you to clean.

Moisture Is The Enemy

Keeping the floors, walls, and items in the area wet may lead to slipping, mold, and damaged furniture. Water and time become your enemy; so once the area has been cleared for safety, immediately dry the area. Old fashioned methods such as mopping or towel drying will do fine, but for a faster process, you may use a wet/dry vacuum cleaner to get rid of the excess liquid. REMEMBER during the flood restoration in Ottawa, not to plug the vacuum cleaner in nearby sockets nor use an extension cord for that matter. Always go for the safest option when drying up the place.

As for drying the furniture, you may want to bring them outside and have them sun-dried.

Drying Up the Property

To quickly dry up the afflicted area, you have to open all the doors and the windows of the house. You may also use your electric and ceiling fans to aid with the drying process.

Disinfect the Area

After everything is dry, disinfect the whole space to prevent bacteria and other harmful substances from spreading into your house.

After Flood Restoration in Ottawa, Prevent Mold Growth

Mold is a secondary problem caused by floods. If they are not completely eradicated, you will be risking the health of you and your family, and weaken your home’s integral structure. To prevent this, you have to clean the areas with cleaning products with a 10% bleach solution on their label. For this, you can apply the solution on the affected area for at least 10 minutes, before rinsing it clean with water or drying. If you are unsure of the damage or damages caused by mold, contact us as soon as possible, so that we may be able to perform mold remediation on the mold-infested area.

We Recommend to Throw Out Unsalvageable Items

Of course, some items cannot be saved after the damage has been done. If the item cannot be rescued through any method, the best choice is to throw it away to prevent it from causing further damage and occupying much-needed space. If your items are valuable, a family heirloom, or antiques however, it is good to know that some restoration companies offer content restoration, to save all those much-loved items.

Find a Partner for Your Flood Restoration in Ottawa

Cleaning up your home after it has sustained flood damages can be easy, but if you cannot handle the situation, the best decision is to always rely on the professionals for help.

Call us at 613-727-7070 or visit our contact page to know more about us and our services. Our operators are at the ready 24/7, so you may contact us at any time!

5 Ideas For Living Room Renovation

Whether it’s a large-scale living room renovation project or a do-it-yourself rehab, you’ll adore your newly remodeled living room. But you’ll love it, even more, when it comes time to sell and your living room renovation projects realize a high return on investment (ROI). These living room renovation ideas are sure to pay off upon resale. Here is a good reason to renovate your living room and the whole house. We have 5 ideas that always work to make a renovation project look fantastic!

5 ideas for living room renovation:

Expand Your Space
New Front Entry Door
Light With New Windows
Perfect Color
Extra Space
Expand Your Living Room
Update Windows And Treatments

Living rooms traditionally were kept tight and compact to conserve energy. But with the open floor plan movement coupled with today’s need for more space, home buyers expect living rooms that are larger than ever.

If you have a room adjoining the living room that you don’t mind sacrificing, you can remove an interior non-load-bearing wall and take over that space. While a messy job, it’s not all that complicated and it can be done by a motivated homeowner. Just make absolutely sure that the wall is not load-bearing. Cap electrical wires under permit or hire an electrician to do the job.

One alternative to an open plan is a broken plan home, which provides small niches of privacy while still maintaining an overall sense of openness. So if you want a proper living room renovation you need proper expanded ambient too.

Make Your Front Entry Door Look Better For Your Living Room Renovation

Do you want a home remodel project that does double duty? If your living room is at the front of your house, installing a new entry door or freshening up your current door accomplishes two things for the price of one. Not only does it charge up your home’s exterior curb appeal, but it also adds new sparkle to your front living room. According to Remodeling magazine’s Cost vs. Value Report, a new entry door has a higher ROI than nearly every other home project, bringing back over 91 percent of its cost upon sale.

Let in the Light With New Windows

Living rooms are the ones that are projected to spend the most time, and nothing helps better than natural light streaming through your windows. If you’re like other homeowners, your living room windows just might be tired, drafty, and sorely lacking in the light transmittal. Give your window spaces life by replacing them with new windows. Remodeling’s Cost vs. Value Report notes that new windows recoup a healthy 70 to 75 percent of their original cost.

With this mid-century modern influenced living room, Washington, DC’s Balodemas Architects created generously sized windows to let a maximum amount of natural light pour in. Living Room Renovation needs light improvement.

Choose the Perfect Color Palette For Your Living Room Renovation Project

In no other room of the house is color so important as in the living room. Whether it’s used for hanging out, watching movies, reading, or sipping wine, the living room always gets plenty of face time. With so much attention focused on this area, the color scheme must be spot-on perfect.

Interior painting is usually one of those no-brainer ROI projects. Because the cost of tools and materials is so incredibly low, you’re sure to realize great returns in buyer appeal.

Choose a living room color palette that appeals to a majority of buyers. White, gray, beige, and other neutrals lead the pack in terms of colors that tend to be mutually liked. Brown, gold, and earthy orange push the living room’s color register to bolder reaches, capturing the attention of would-be buyers. Deep blue living rooms communicate a sense of rich tradition, while lighter blues evoke the breezy, carefree feeling of a day at the seaside.

Create Faux Extra Space

Whether or not you have bumped out a wall to make more living room space, you’ll still want to create the illusion of greater space on the cheap with simple techniques:

Ceiling: Make sure that the ceiling is white, in order to avoid a claustrophobic feeling.
Area Rug: Don’t make the mistake of having an area rug that is too small. Aim for between 10 to 20 inches of bare floor space between the edges of the rug and the walls.
Statement Piece: A large, colorful, or otherwise showy statement piece like a chandelier captures the eye and makes the room feel larger.
Shelves: Mount shelves high, near the ceiling, to pull the eye upward.
Storage: Build or purchase storage units that hug close to the wall. Getting the clutter out of sight vastly improves the look of any room and instantly makes it feel larger.